Amine-based
Thermal Expansion Coefficient Correlations of MEA and Water Mixtures
https://doi.org/10.1155/2020/7051368 ““
Chunfei Wu
Methodologies – absorption, solvent properties testing
Amine-based
Surface tension correlations of MEA and water mixtures
https://doi.org/10.1155/2020/7051368 “Table 16 lists the relevant correlations for the surface tension. The behaviour of surface tension of pure and aqueous MEA is claimed to be linear with
Chunfei Wu
Amine-based
Viscosity correlations of MEA and water mixtures
https://doi.org/10.1155/2020/7051368 “The nature of the model depends on the solution characteristics. Generally, the liquid viscosity decreases with the increase of temperature, and it increases with
Chunfei Wu
Amine-based
Density correlation of MEA and water mixtures
https://doi.org/10.1155/2020/7051368 “This section discusses the empirical correlations developed for different types of MEA solutions. It also highlights the theoretical background of those correlations especially the
Chunfei Wu
Amine-based
Surface tension measurement of MEA and water mixtures
https://doi.org/10.1155/2020/7051368 “Surface tension has a high influence on the effective interfacial area of the packing material [32] and ultimately influences the overall mass transfer rate.
Chunfei Wu
Amine-based
Viscosity measurement of MEA and water mixtures
https://doi.org/10.1155/2020/7051368 “Viscosity measurements of MEA and water mixtures are equally important as density measurements in the postcombustion absorption process. Viscosity has a high impact on
Chunfei Wu
Amine-based
Density measurement of MEA and water mixtures
https://doi.org/10.1155/2020/7051368 “Table 1 summarizes the performed studies on density measurements of pure MEA under different temperatures in which most of the previous density measurements were limited to
Chunfei Wu
Amine-based
Experimental setup for obtaining VLE and heat of absorption data
https://doi.org/10.1021/acs.energyfuels.0c00880 “The experimental setup for obtaining VLE and heat of absorption data is schematically shown in Figure 2. This is precisely the same equipment used by Kim
Chunfei Wu
Amine-based
Experimental methods of CO2 absorption for kinetic analysis
https://doi.org/10.3390/pr9122140 “In an experimental case, the sample of desired CO2 absorbent was prepared by dissolving pre-weighed amine solvent into deionized water with a certain amount of
Chunfei Wu
Amine-based
CO2 solubility analysis method
https://doi.org/10.3389/fenrg.2021.785039 “According to Dong et al. (2010), CO2 solubility has been measured in the stainless-steel reactor. The apparatus contains four 400 cm3 stainless-steel equilibrium cells (they have an identical
Chunfei Wu