Methodologies – absorption, solvent properties testing

https://doi.org/10.1016/j.ccst.2022.100028 “The CO2 loading capacity measurements were carried out by using a gas absorption setup that is shown in Fig. 2. The equipment description and calculation of CO2 loading

https://doi.org/10.1016/j.ccst.2022.100040 “New CO2 absorbents pentane-3-oxy-1,5-diyl dimethyl dicarbonate (DC2, 98%) and octane-3,6-dioxy-1,8-diyl dimethyl dicarbonate (DC3, 96%) were provided by Chengdu Organic Research Institute, which has been reported

https://doi.org/10.1007/s13369-015-2008-z 2.1 Laboratory Setup For continuous CO2 removal from flue gas, a special laboratory unit was constructed. The most important parameters of the unit are

https://doi.org/10.1016/j.egypro.2017.03.1277 “The experiments were performed in a bench scale full cycle CO2 capture pilot plant shown in Fig. 1. The absorption and regeneration columns were

https://doi.org/10.1016/j.egypro.2017.03.1312 “2.1. Rotating Packed Bed (RPB). This was manufactured from PEEK, polypropylene and 316L stainless steel. The inner diameter of the bed was 80mm and

https://doi.org/10.1016/j.egypro.2017.03.1322 “Figure 1 shows the small-scale experimental apparatus of CO2 capture and recovery. It consists of one pair of absorber and stripper circulating an amine