Methodologies – absorption, solvent properties testing

https://doi.org/10.1016/j.egypro.2017.03.1211 “A solvent screening setup (S.S.S.) as shown in figure 1 constituting six glass reactors (V=250mL ± 0.5) was used for the CO2 absorption experiments.

https://doi.org/10.1039/C7RA01352C “Table 2 provides a list of published works related to the determining of KGCO2aV in absorber packed columns operated in low-pressure conditions. For each list, detailed information

https://doi.org/10.1155/2015/965015 “Figure 2 illustrates the methodology proposed to determine the chemical and physical absorbing capacity of solvents. The apparatus consists of a gas bubbler setup

https://doi.org/10.1016/j.petlm.2016.11.002 “Four sets of experiments were performed: heating and cooling profiles, comparison of conventional and microwave regeneration, CO2 absorption isotherms and multiple microwave regeneration cycles. For

https://doi.org/10.1016/j.petlm.2016.11.002 “We employ a laboratory-scale bubble column reactor with 30 wt% aqueous MEA solution within a single mode microwave applicator at 2.45 GHz. The basis

https://doi.org/10.1016/j.petlm.2016.11.002 “An experimental set–up for simultaneously investigating amine degradation rate, amine cost, regeneration energy and reclaiming energy is being proposed in this review paper (Fig. 24).

https://doi.org/10.1016/j.ijggc.2018.10.008 ” 2.2. Microwave generator setup As an exhaustive description of the microwave regeneration setup can be found elsewhere (McGurk et al., 2017), only a succinct