CO2 absorption procedure

https://doi.org/10.1016/j.ccst.2022.100028 “The CO2 loading capacity measurements were carried out by using a gas absorption setup that is shown in Fig. 2. The equipment description and calculation of CO2 loading

https://doi.org/10.1016/j.ccst.2022.100040 “New CO2 absorbents pentane-3-oxy-1,5-diyl dimethyl dicarbonate (DC2, 98%) and octane-3,6-dioxy-1,8-diyl dimethyl dicarbonate (DC3, 96%) were provided by Chengdu Organic Research Institute, which has been reported

https://doi.org/10.1007/s13369-015-2008-z 2.1 Laboratory Setup For continuous CO2 removal from flue gas, a special laboratory unit was constructed. The most important parameters of the unit are

https://doi.org/10.1016/j.egypro.2017.03.1277 “The experiments were performed in a bench scale full cycle CO2 capture pilot plant shown in Fig. 1. The absorption and regeneration columns were

https://doi.org/10.1016/j.egypro.2017.03.1312 “2.1. Rotating Packed Bed (RPB). This was manufactured from PEEK, polypropylene and 316L stainless steel. The inner diameter of the bed was 80mm and

https://doi.org/10.1016/j.egypro.2017.03.1322 “Figure 1 shows the small-scale experimental apparatus of CO2 capture and recovery. It consists of one pair of absorber and stripper circulating an amine

https://doi.org/10.1016/j.egypro.2017.03.1211 “A solvent screening setup (S.S.S.) as shown in figure 1 constituting six glass reactors (V=250mL ± 0.5) was used for the CO2 absorption experiments.

https://doi.org/10.1039/C7RA01352C “Table 2 provides a list of published works related to the determining of KGCO2aV in absorber packed columns operated in low-pressure conditions. For each list, detailed information

https://doi.org/10.1155/2015/965015 “Figure 2 illustrates the methodology proposed to determine the chemical and physical absorbing capacity of solvents. The apparatus consists of a gas bubbler setup

https://doi.org/10.1016/j.petlm.2016.11.002 “Four sets of experiments were performed: heating and cooling profiles, comparison of conventional and microwave regeneration, CO2 absorption isotherms and multiple microwave regeneration cycles. For