CO2 absorption procedure

https://doi.org/10.1016/j.petlm.2016.11.002 “We employ a laboratory-scale bubble column reactor with 30 wt% aqueous MEA solution within a single mode microwave applicator at 2.45 GHz. The basis

https://doi.org/10.1016/j.petlm.2016.11.002 “An experimental set–up for simultaneously investigating amine degradation rate, amine cost, regeneration energy and reclaiming energy is being proposed in this review paper (Fig. 24).

https://doi.org/10.1016/j.ijggc.2018.10.008 ” 2.2. Microwave generator setup As an exhaustive description of the microwave regeneration setup can be found elsewhere (McGurk et al., 2017), only a succinct

https://doi.org/10.3390/pr9122140 “In an experimental case, the sample of desired CO2 absorbent was prepared by dissolving pre-weighed amine solvent into deionized water with a certain amount of

https://doi.org/10.3390/en14206822 “In the present work, a CO2 absorption capacity was measured and reported in terms of CO2 loading (mol CO2/mol amine). For this experiment, 25 mL of

https://doi.org/10.3390/en14206822 “The experimental setup used for the high-pressure CO2 capture experiments is schematically depicted in Figure 1; it consists of a non-stirred pressure vessel (Parr Instrument Co.,

https://doi.org/10.1016/j.cesx.2021.100096 “A schematic drawing of the VLE apparatus employed in this work is shown in Fig. 2. This apparatus and its standard operating procedure are the