The following content, obtained from https://doi.org/10.1016/j.jcou.2016.04.003, shows the procedure of ICCU-RWGS. The gas analysis was carried out using IR spectrometer. “The experimental system mainly consists
The following information is obtained from (https://doi.org/10.1016/j.jcou.2022.102049) regarding the calculation of CO selectivity and CO2 conversion. “In analysis, the moisture in the outlet gas was
In ICCU-RWGS, the composition of gases is determined normally by an online gas analyser. Key performance indicators include CO2 conversion, the capacity of CO2 capture,
Fixed bed reactors are normally used for ICCU-RWGS. CO2, N2 and H2 are used to provide the CO2 source, purge gas and reduction agent. Gas
Dr Wu’s group initially reported that pure CaO could act as sorbent and catalyst for ICCU-RWGS without transition metals; and high efficiency and conversion were
Ni-Ce-Zr dual functional materials were prepared by the sol-gel method and applied for ICCU-DRM. The addition of Ce enhanced the stability of the materials significantly
The mixture of K-Li4SiO4 mixed with Ni/Al2O3 was used as the dual functional materials for ICCU-DRM (https://doi.org/10.1016/j.seppur.2021.119476). Some researchers might argue that the physical mixture should
Dr Qin’s group investigated ICCU-DRM using K-Li4SiO4 mixed with Ni/Al2O3 as the dual functional materials (https://doi.org/10.1016/j.seppur.2021.119476). Ten cycles of ICCU was reported. The following content was
Dual functional materials, containing K-Li4SiO4 sorbent as the sorbent and 10 wt% Ni/Al2O3 as the catalyst, were investigated for ICCU-DRM, and the influence of temperature (600, 625
Ni-Ca based dual functional materials have two key components, including Ni catalytic sites and CaO adsorption sites. The distance between these two is important in
A free platform to share knowledge of science and engineering. Extensive analysis of literature and summarized review in carbon capture science and technology.
© 2022 Science-Share.com.All Rights Reserved.