The stability and deactivation of ICCU-DRM using Fe2O3/Al2O3 and CaCO3 combined functional materials (https://doi.org/10.1021/acs.iecr.9b05783). As shown in the following figure, the production of H2 and
Coke deposition on Ni-Ba based dual functional materials for ICCU-DRM was analysed using Raman Spectroscopy (https://doi.org/10.1016/j.jcou.2020.101201). D-band and G-band peaks are used for carbon observation.
Around 10 cycles of ICCU-DRM (19 hours of processing) were reported by Molina-Ramirez et al. (https://doi.org/10.1016/j.jcou.2020.101201). The authors used Ni-Ba based dual functional materials at
Ni-Ba based dual functional materials were used to investigate the influence of reaction temperatures (600, 650 and 700 °C) on CO2 and methane conversion. This
Coke formation is a complex topic on the surface of catalyst, in particular for ICCU-DRM. This topic is relatively new, and could mainly gain insights
Ni loading significantly affect ICCU performance. In this case, ICCU-DRM was investigated. The authors discussed the performance from two key perspectives – 1) per unit
In-situ DRIFTs is relatively simply than other advanced in-situ reactions and is commonly used to understand reaction intermediates. The following procedure was reported by Hu
Nano-CaO or CaCO3 is supposed to have high capacity of CO2 capture, better stability and also high reaction speed. This is mainly due to the
The conversion of CO2 and methane is important indicators of the performance of ICCU-DRM, in addition to the selectivity to H2 and CO. The follow
DOI: 10.1126/sciadv.aav5077 “In situ XRD experiments were performed in a Bruker D8 Advance x-ray diffractometer to compare the process decarbonation kinetics of CaL reforming of
A free platform to share knowledge of science and engineering. Extensive analysis of literature and summarized review in carbon capture science and technology.
© 2022 Science-Share.com.All Rights Reserved.