CO2 adsorption - solid materials
Summary of CO2 capture capacities using silica based materials
https://doi.org/10.1016/j.apenergy.2016.09.081
Chunfei Wu
Silica based adsorbents
CO2 adsorption - solid materials
CO2adsorption and desorption performance measurement
https://doi.org/10.1093/ce/zkac020 “The adsorption of CO2 was carried out at 25°C and atmospheric pressure using 15/85 vol% CO2/N2 as a feed gas representing the concentration of CO2 in the
Chunfei Wu
CO2 adsorption - solid materials
Preparation of amine-impregnated MCM-41
https://doi.org/10.1093/ce/zkac020 “Hexagonal mesoporous silica MCM-41 was synthesized by dissolving 2 g of pore-generating agent, CTAB, with 120 mL of deionized water under constant agitation. After
Chunfei Wu
CO2 adsorption - solid materials
Preparation and Functionalization of Ordered Hierarchical Porous Silica Materials
https://doi.org/10.3390/inorganics10070087 “Ordered hierarchical porous silica materials with micro/mesoporous structures were prepared using dextran as a template via the sol-gel technique. First, an aqueous–alcoholic dextran solution
Chunfei Wu
CO2 adsorption - solid materials
Influence of temperature and kinetics of CO2 capture using spherical amine grafted silica aerogels
https://doi.org/10.1039/D0RA04497K “As shown in Fig. 8, the CO2 adsorption kinetics of the SASA-3 change with different temperatures. On account of the thermodynamic theory, the CO2 adsorption capacity of
Chunfei Wu
CO2 adsorption - solid materials
Spherical amine grafted silica aerogels for CO2 capture
https://doi.org/10.1039/D0RA04497K “As shown in Fig. 7, the CO2 adsorption kinetics of the SASAs change with different grafting times. The CO2 adsorption capacity first increases, then starts to decrease
Chunfei Wu
CO2 adsorption - solid materials
Preparation of the spherical amine grafted silica aerogels
https://doi.org/10.1039/D0RA04497K “WG, W and HAc were mixed with a volumetrical ratio of 6 : 33 : 1.2 under room temperature (25 °C) to form a water glass solution. The
Chunfei Wu
CO2 adsorption - solid materials
Stability of silica-based monoliths for CO2 capture
https://doi.org/10.1590/1980-5373-MR-2019-0285 “In order to better evaluate the results, the performance analysis was repeated for the samples that presented the best CO2 adsorption performances (Ti/M1-P and Zr/M1-P),
Chunfei Wu
CO2 adsorption - solid materials
Silica-based monoliths for CO2 capture
https://doi.org/10.1590/1980-5373-MR-2019-0285 “Fig. 12 shows the CO2 adsorption curves at 30 ºC for the PEHA-functionalized samples. According to the cycles presented in the cited figures, it can be
Chunfei Wu
CO2 adsorption - solid materials
Silica monolith synthesis
https://doi.org/10.1590/1980-5373-MR-2019-0285 “Monolith M1 was prepared using tetraethoxysilane (TEOS) as a silica source and the cetyltrimethylammonium bromide (CTAB) as surfactant. The methodology for the preparation of
Chunfei Wu