https://doi.org/10.1016/j.jiec.2017.05.018 “CO2 adsorption measurements were carried out at different temperature on HPS-TEPA-60% to test the influence of the adsorption temperature. A better fitting between the data
https://doi.org/10.1016/j.jiec.2017.05.018 “The large CO2 capture capacity and better regenerability are necessary for adsorbents in the industrial applications. Ten CO2 adsorption–desorption cycles were carried out in this study
https://doi.org/10.1016/j.jiec.2017.05.018 ” In situ infrared (IR) spectroscopy was employed to study the adsorption mechanism over HPS-TEPA-60% adsorbents, as shown in Fig. 9. The nature of adsorbed
https://doi.org/10.1016/j.jiec.2017.05.018 ” The influence of temperature on the CO2 capture process was investigated by operating adsorption experiments at 30 °C, 45 °C, 60 °C, 75 °C, 90 °C and 105 °C with
https://doi.org/10.1016/j.jiec.2017.05.018 “The influence of the TEPA loaded capacity of HPS on the CO2 adsorption performance has been investigated at 75 °C with a N2 stream containing 15 vol.% CO2.
https://doi.org/10.3390/pr10020422 “For the adsorption tests on APTES20, seven concentrations (5%, 8%, 10%, 12%, 15%, 18%, 20%) for both velocities were explored. In Figure 9 and Figure 10, two
https://doi.org/10.3390/pr10020422 “In fact, the breakthrough curves at the fixed concentration of CO2 (12%) in Figure 8 confirmed that: for a continuous process, the optimum was obtained with the
https://doi.org/10.1016/j.apenergy.2016.09.081 “In order to avoid high energy penalty costs, apart from a high CO2 capture capacity and a fast adsorption-desorption kinetics, CO2 sorbents should be stable and
https://doi.org/10.1016/j.apenergy.2016.09.081 “The CO2 adsorption performance of the impregnated materials at different temperatures gives essential information about the best temperature at which the sorbents should be used
https://doi.org/10.1016/j.apenergy.2016.09.081 “Fig. 6 shows the adsorption kinetics of CO2 onto silica gel before and after its impregnation with different DETA loadings measured at 25 °C. It can be
A free platform to share knowledge of science and engineering. Extensive analysis of literature and summarized review in carbon capture science and technology.
© 2022 Science-Share.com.All Rights Reserved.