MOF- and COF-based adsorbents

CO2 adsorption - solid materials

Introduction of spiropyran based MOFs

https://doi.org/10.1016/j.mtsust.2022.100149 “Spiropyran (SP) is also another group of photochromic materials with two orthogonal π-networks bonded by a central tetrahedral carbon (Cspiro). When exposing to UV irradiation, a

Read Article
CO2 adsorption - solid materials

Introduction of diarylethene based MOFs

https://doi.org/10.1016/j.mtsust.2022.100149 ” Although the azobenzene class of photochromes is known to experience drastic structural alteration, only modest light absorption changes are exhibited and the photo-induced

Read Article
CO2 adsorption - solid materials

Introduction of azobenzene based MOFs

https://doi.org/10.1016/j.mtsust.2022.100149 ” Azobenzene (AB) based photochemistry is the most commonly researched cis(Z)-trans(E) isomerization in photochromic moieties contained switching MOFs, owing to the composition of an azo

Read Article
CO2 adsorption - solid materials

Introduction to photo-switching MOFs

https://doi.org/10.1016/j.mtsust.2022.100149 “Photo switching ability is a kind of photoresponsive property that after exposure to the light, molecules or moieties can undergo a transformation between different

Read Article
CO2 adsorption - solid materials

Stability of different MOFs for CO2 capture

https://doi.org/10.3390/en15093473 “The reusability of the adsorbent is an important factor for the practical application performance of the adsorbent; therefore, the cyclic adsorption performances were investigated.

Read Article
CO2 adsorption - solid materials

Different MOFs for CO2 capture

https://doi.org/10.3390/en15093473 “The ability of three different MOFs and their composites to adsorb carbon dioxide was evaluated using the approach of cyclic CO2 adsorption analysis on a

Read Article
CO2 adsorption - solid materials

Clary incorporated MOF for CO2 capture

https://doi.org/10.3390/en15093473 “Clay minerals are ubiquitous and are capable of interlayer and surface adsorption of CO2. In addition, their modification allows for the improvement of CO2 adsorption

Read Article
CO2 adsorption - solid materials

Silica incorporated MOF for CO2 capture

https://doi.org/10.3390/en15093473 “Aerosil, or fumed silica, is synthetic amorphous silicon dioxide—nonporous 3D material with a high surface area. Like C-containing MOF-composites, SiO2-containing MOF-composites combine the advantages

Read Article
CO2 adsorption - solid materials

Carbon incorporated MOF for CO2 capture

https://doi.org/10.3390/en15093473 “Recently, the incorporation of carbon-based compounds to MOFs to produce MOF-carbon composites has been intensively studied. MOF-carbon composites can be considered as a new

Read Article