Influence of adsorbent development

https://doi.org/10.1039/C6TA06133H “Li4SiO4 was synthesised from LiNO3 (Alfa Aesar, UK) and colloidal silica (Aldrich Chemicals, USA) as the starting precursors. Initially 2.39 M LiNO3 solution was prepared by dissolving

https://doi.org/10.3390/ijms20040928 “SiO2 is an essential raw material for the synthesis of Li4SiO4. In addition to pure SiO2, there are many SiO2-rich industrial wastes which have attracted

https://doi.org/10.3390/ijms20040928 “Wang et al. [49] prepared K-, Mg-, Cr-, and Ce-doped Li4SiO4 and found that Ce was the most difficultly doped into the Li4SiO4 crystal lattice among

https://doi.org/10.3390/ijms20040928 “The CO2 absorption rate of Li4SiO4 material is mainly controlled by the diffusion of ions and CO2. Zhao et al. [36] reported that solid solution usually

https://doi.org/10.3390/ijms20040928 “It is clear that Li4SiO4 material synthesized by the solid-state reaction method from SiO2 and Li2CO3 achieves low CO2 absorption capacity, due to the low porosity of Li4SiO4 generated

https://doi.org/10.3390/ijms20040928 “Li4SiO4 material is usually synthesized by the solid-state reaction method, and the preparation process is illustrated by Equation (1) [22,23], and a core-shell model was

https://doi.org/10.3390/ijms20040928 “Kim et al. [29] synthesized Li4SiO4 material from LiOH and fumed silicate by the solid-state reaction method. They reported that the synthesis temperature could be