https://doi.org/10.1016/j.ijggc.2016.11.016 In Section 2.4 of the above reference, the calculations of CO2 absorption capacity, cyclic capacity and heat of desorption and sensible heat are presented.
https://doi.org/10.1016/j.cej.2012.09.087 In the above reference, the addition of Cu(OH)2 with 0.1, 0.2 and 0.5 g/L was investigated. The results (Figure 2) show that the addition
https://doi.org/10.1016/j.cej.2012.09.087 In the above reference, process chemistry related to the reactions of CO2 in ammonia solution, the formation of complex ions in the section 2
https://doi.org/10.1016/j.cep.2020.108002 In the above referenced paper, Figure 6 shows the influence of gas flow rate (1.5-3.0 L/min) on mass transfer coefficient with and without the
https://doi.org/10.1016/j.cep.2020.108002 In the above referenced paper, Figure 5 shows that the reduce of CO2 inlet concentration from 9 to 20% resulted in an increase of
https://doi.org/10.1016/j.cep.2020.108002 In the above referenced paper, the increase of ammonia concentration from 2 to 4 % resulted in an increase of mass transfer coefficient of
https://doi.org/10.1016/j.cep.2020.108002 In the above referenced work, the calculation of mass transfer coefficient was given. The results (Figure 2) show that the addition of Fe3O4 nanoparticles
https://doi.org/10.1016/j.ijggc.2016.11.016 Zn(II), Cu(II) and Ni(II) based metal ions were added to ammonia for CO2 capture. The tests were carried out using a wetted-wall column. The
https://doi.org/10.1016/j.cej.2022.138999 ” To further evaluate the predictive capability of the model, additional CO2 absorption experiments were carried out under different operating conditions and the corresponding results were
https://doi.org/10.1016/j.cej.2022.138999
A free platform to share knowledge of science and engineering. Extensive analysis of literature and summarized review in carbon capture science and technology.
© 2022 Science-Share.com.All Rights Reserved.