Experimental system

https://doi.org/10.1016/j.egypro.2011.02.012

https://doi.org/10.3390/cryst8010039 ” The experimental device used is shown in Figure 4. The inside diameter of the column is 5 cm and the gas distributor is a

https://doi.org/10.1016/j.cej.2022.138999 “The CO2 capture was performed under isothermal and isobaric conditions in a home-built glass cylinder with a diameter of 56 mm and a height of 300mm fitted with a

https://doi.org/10.1016/j.seppur.2022.120786 ” The microporous PTFE hollow-fibre membrane comprised a nominal pore size of 0.18 µm (Zeus Industrial Products, Ireland). However, mono-axial stretching of the PTFE tube

https://doi.org/10.1016/j.dib.2018.02.047 ” The experimental procedure for measuring the overall mass transfer coefficient is described by the following points: 1. prepare the solvent with the desired

https://doi.org/10.1016/j.dib.2018.02.047 ” Fig. 1 shows the experimental apparatus used in this work and Table 1 presents the instrument list. The Wetted Wall Column allows for counter-current contact between

https://doi.org/10.1016/j.egypro.2014.12.438 ““

https://doi.org/10.3390/pr10050859 ” The process for CO2 separation is conventional. The flue gases are first compressed to compensate for losses in the absorption column and where ammonia