Rotating packed bed

https://doi.org/10.1016/j.ijggc.2013.12.005 ” 4.4.1. Justification for case study Temperature bulge in conventional absorber was reported by Freguia and Rochelle (2003), Kvamsdal and Rochelle (2008), Kvamsdal et al. (2009). It limits

https://doi.org/10.1016/j.ijggc.2013.12.005 ” 4.3.1. Justification for case study The study is performed to investigate the effect of lean MEA temperature on the performance of RPB absorber. The

https://doi.org/10.1016/j.ijggc.2013.12.005 ” 4.2.1. Justification for case study Increased lean MEA concentration leads to higher capture level and greater tendency for equipment corrosion. Good understanding of this

https://doi.org/10.1016/j.ijggc.2013.12.005 ” Fig. 4, Fig. 5 show effects of varying rotor speed on CO2 capture level for 56 wt% and 75 wt% lean MEA concentrations at 20.9 °C and 39.5 °C lean

https://doi.org/10.1016/j.ijggc.2013.12.005 “PI technology was invented in the late 1970s and early 1980s. RPB, a typical PI equipment, was invented by Ramshaw and Mallinson (1981) for enhancing the gas–liquid

https://doi.org/10.1016/j.egypro.2017.03.1293 “Model validation results are shown in Table 3 which gives percentage error prediction of not more than 12 % on the lean-MEA CO2 loading.

https://doi.org/10.1016/j.egypro.2017.12.478 ““

https://doi.org/10.1016/j.egypro.2017.12.478 ““

https://doi.org/10.1016/j.egypro.2017.12.478 ““