https://doi.org/10.1016/j.fuel.2022.123420 “The ICCM process is a combination of several steps, including CO2 capture over the physical mixed Li, Na, K-doped MgO (Eq.5), the purge of residual
https://doi.org/10.1016/j.cej.2022.135394 ” The ICCU performance of the physical mixture of CaO and sub-nanometer Ni cluster supported on ceria nanorods were evaluated at 550 °C and
https://doi.org/10.1016/j.cej.2022.135394 “Among various metal oxides, e.g. Al2O3, SiO2, and TiO2, used as supports in methanation catalysis, CeO2 has drawn intensive attention due to its basic nature, high stability, and capacity
https://doi.org/10.1016/j.fuel.2022.123842 “Catalytic activities of LaNiO3-derived DFMs are evaluated by analyzing the evolution of CH4 and CO production per cycle with reaction temperature (Fig. 7). These parameters
“Li4SiO4 supported 10wt% Ni was prepared with Li2CO3, SiO2, and NiO as the precursors by Jo et al. (Jo et al., 2022a). Its capture and methanation performance was compared
“The promotion effects of Na, K, and Ca (15 wt% against Al2O3) were investigated on Ni/γ-Al2O3 by Kosaka et al. (Kosaka et al., 2021). It was found that Ni/γ-Al2O3 had
“The synergistic effect between Ni and Ce on the performance of the ICCC-Met process was studied by Sun et al. (Sun, H. et al., 2022). The Ni-based DFM was
“Ma et al. investigated the performance of the ICCC-Met process using 10%Ni/CaO modified with different metals (M=Mg, Al, Mn, Y, Zr, La, or Ce, at a Ca:M molar
The distance between catalytic sites and sorbent is important for DFMs performance. The two functional sites need sufficient distance to work properly without negative effects
Al2O3 and CeO2 had been used as Ru-catalyst support for ICCU-methanation, while CaO was used as the adsorbent for CO2 capture. The studies of different
A free platform to share knowledge of science and engineering. Extensive analysis of literature and summarized review in carbon capture science and technology.
© 2022 Science-Share.com.All Rights Reserved.