Dr Qin’s group investigated ICCU-DRM using K-Li4SiO4 mixed with Ni/Al2O3 as the dual functional materials (https://doi.org/10.1016/j.seppur.2021.119476). Ten cycles of ICCU was reported. The following content was
Dual functional materials, containing K-Li4SiO4 sorbent as the sorbent and 10 wt% Ni/Al2O3 as the catalyst, were investigated for ICCU-DRM, and the influence of temperature (600, 625
The stability and deactivation of ICCU-DRM using Fe2O3/Al2O3 and CaCO3 combined functional materials (https://doi.org/10.1021/acs.iecr.9b05783). As shown in the following figure, the production of H2 and
Around 10 cycles of ICCU-DRM (19 hours of processing) were reported by Molina-Ramirez et al. (https://doi.org/10.1016/j.jcou.2020.101201). The authors used Ni-Ba based dual functional materials at
Ni-Ba based dual functional materials were used to investigate the influence of reaction temperatures (600, 650 and 700 °C) on CO2 and methane conversion. This
ICCU-DRM have two key stages, including CO2 capture and the utilisation of the captured CO2 (or sorbent regeneration). Therefore, reaction time plays a key role
Both sorbent regeneration and dry reforming methane are endothermic reactions. Therefore, a higher temperature would promote both reactions for sorbent regeneration and syngas production. However,
A free platform to share knowledge of science and engineering. Extensive analysis of literature and summarized review in carbon capture science and technology.
© 2022 Science-Share.com.All Rights Reserved.