https://doi.org/10.1007/s12034-019-1936-8 “To evaluate the steadiness of the synthesized materials for CO2CO2 capture, multiple cycles of the adsorption–desorption study were conducted with the 30-TETA-ZSM-5 adsorbent. The adsorption of CO2CO2 was
https://doi.org/10.1007/s12034-019-1936-8 “A breakthrough curve is very much useful to characterize the nature of an adsorbent. To estimate the CO2CO2 capture capacity of the synthesized adsorbents, breakthrough curves
https://doi.org/10.1016/j.seppur.2021.119483 “Fig. 5 illustrates breakthrough result at a flow rate of 1.00 L/min measured for a steel pipe with inner diameter of 1.5 mm (as shown in Fig. 2a)
https://doi.org/10.1016/j.jmrt.2020.02.061 “As such, the regeneration adsorption performance of the adsorbents were measured, and the regenerability is shown in Fig. 9. After 20 cycles of vacuum pressure
https://doi.org/10.3390/molecules26247520 “The obtained results are presented in Figure 14 and Table 5. It can be observed that the CO2 adsorption capacity after 200 cycles, i.e., after about 11 days
https://doi.org/10.1039/D2SC00702A “The breakthrough experiments of SAPO-35_0.14 were performed by utilizing binary CO2/N2 (20 : 80 v/v) gas mixtures at 298 K and atmospheric pressure in a fixed bed
A free platform to share knowledge of science and engineering. Extensive analysis of literature and summarized review in carbon capture science and technology.
© 2022 Science-Share.com.All Rights Reserved.